Availability: Black and White DF83 Gen 2 grinders are currently in stock and ready to ship. Select a color above for the latest availability.
SSP burr notice: Optional SSP burrs do not come installed or aligned. The stock Red Titanium burrs remain included, and upgraded burrs may ship in the grinder box or separately.
Voltage: This Espresso Outlet listing is the 120V / 60Hz US model. International customers can purchase the DF83 Gen 2 from Turin Grinders; confirm voltage and plug compatibility before ordering.
Turin DF83 Gen 2 Single-Dose Espresso Grinder
The Turin DF83 Gen 2 is a powerful 83mm flat-burr single-dose grinder for coffee drinkers who want fast grinding, full-bodied espresso, low retention and a large aftermarket burr platform. It combines Turin Red Titanium-coated burrs, a 550W motor, fixed 1,400 RPM operation, stepless adjustment, a plasma ion generator and a bellows-assisted workflow in a compact aluminum body.
It is especially well suited to traditional espresso, medium and dark roasts and milk drinks, while retaining enough adjustment range for light-roast espresso, pour-over, drip, AeroPress and French press. The fixed-speed design keeps daily operation straightforward: weigh the beans, start the grinder, add the dose and use the bellows after grinding.
Why Choose the Turin DF83 Gen 2?
-
Large 83mm flat burrs: A broad cutting surface grinds espresso doses quickly and supports a wide selection of premium burr geometries.
-
Red Titanium stock burrs: The included espresso-focused set balances body, sweetness and clarity.
-
Powerful 550W motor: Provides strong fixed-speed performance for dense beans and fine espresso settings.
-
Low-retention single dosing: A short grounds path, declumper and bellows help reduce carryover between coffees.
-
Plasma anti-static system: Ion-generator probes in the chute help reduce static and loose chaff.
-
Stepless adjustment: The polished aluminum collar allows very small changes while dialing in espresso.
-
Improved carrier stability: Four guide posts and four springs support the upper burr carrier and help maintain consistent alignment.
-
Anti-popcorn collar: Helps keep beans in the chamber when dosing into a running grinder.
Turin DF83 Gen 2 Specifications
| Burrs |
83mm Turin Red Titanium-coated flat espresso burrs |
| Motor |
550W |
| Speed |
Fixed 1,400 RPM |
| Adjustment |
Stepless polished-aluminum collar with removable indicator |
| Static control |
Plasma ion generator in the exit chute |
| Dose capacity |
Up to approximately 50g |
| Dimensions |
Approximately 9 in. deep × 6 in. wide × 14.5 in. high with bellows |
| Weight |
Approximately 24 lb |
| Body |
Painted aluminum; Black or White |
| Dosing cup |
58mm black metal dosing cup |
| Electrical |
120V / 60Hz US model |
| Warranty |
One year through Espresso Outlet, subject to complete terms |
What Changed in DF83 Gen 2?
| Version |
Meaningful differences |
| Original DF83 |
Established the affordable 83mm flat-burr, fixed-speed single-dose platform. |
| DF83 Gen 2 (current) |
Adds the redesigned exterior, polished adjustment collar, plasma ion generator, integrated anti-popcorn collar and four-post/four-spring upper-burr support system. |
Which DF83 Burrs Should I Choose?
The stock Red Titanium burrs are the safest choice for buyers seeking traditional espresso body. Alternative burr geometry can shift the grinder toward clarity, separation or sweetness.
| Burr |
Best suited for |
Cup profile |
| Turin Red Titanium |
Espresso and milk drinks |
Fuller body, sweetness and balanced clarity |
| Turin brew burrs |
Pour-over and filter |
Cleaner separation and lower-fines brewing |
| SSP High Uniformity |
Espresso |
Greater intensity, precision and body |
| SSP Multipurpose |
Light-roast espresso and filter |
Higher clarity and flavor separation |
| SSP Cast Lab Sweet |
Espresso and filter |
Sweetness and clarity with more texture than Multipurpose |
For a deeper comparison, read the DF83 burr-selection guide. Optional SSP burrs ship uninstalled and unaligned.
Fast Single-Dose Workflow
- Weigh the beans for your recipe.
- Start the grinder before adding coffee.
- Pour the dose through the integrated anti-popcorn collar.
- Allow grinding to finish, then press the bellows firmly a few times.
- Transfer the grounds from the included 58mm dosing cup to the portafilter or brewer.
What Comes in the Box?
- Turin DF83 Gen 2 grinder in the selected color
- Installed 83mm Red Titanium-coated flat burrs
- Silicone bellows and wood lid
- Integrated anti-popcorn collar
- 58mm black metal dosing cup
- Silicone dosing-cup tilter
- Chute-cleaning brush
- Instruction manual
Fixed Speed or Variable Speed?
The DF83 Gen 2 runs at a fixed 1,400 RPM. That is an advantage for buyers who want a powerful 83mm grinder with a consistent, straightforward daily workflow and do not expect to tune motor speed as another brewing variable.
Variable speed is useful when you want to experiment with feed rate, throughput and how a particular burr geometry behaves at different RPM settings. It does not automatically produce better coffee, and there is no single ideal RPM for every coffee. Burr geometry, roast level, dose, grind setting and brew recipe generally matter more than the number shown on a speed dial.
Choose the fixed-speed DF83 Gen 2 when simplicity, fast grinding and 83mm value are the priorities. Choose the DF83V V3 when adjustable RPM, a brushless motor and a horizontal controlled-feed design justify the additional cost for your workflow.
DF83 Gen 2 vs DF83V V3 vs DF64 Gen 2.7 vs DF64V Gen 3
These grinders share a stepless, low-retention single-dose workflow, but they are intended for different buyers. Moving from 64mm to 83mm primarily provides a larger burr platform, higher-powered motor and faster throughput. Moving from the DF83 Gen 2 to the DF83V adds variable-speed control and a brushless horizontal-drive design.
| Buying factor |
DF83 Gen 2 |
DF83V V3 |
DF64 Gen 2.7 |
DF64V Gen 3 |
| Burr platform |
83mm flat |
83mm flat |
64mm flat |
64mm flat |
| Motor |
550W |
680W brushless DC |
250W AC |
300W brushless DC |
| Speed control |
Fixed 1,400 RPM |
Variable 300–1,600 RPM |
Fixed speed |
Variable, up to 1,800 RPM |
| Daily workflow |
Simple upright bellows workflow |
Horizontal controlled feed with chute knocker |
Versatile upright bellows workflow |
Compact horizontal variable-speed workflow |
| Intended brewing |
Especially strong for espresso and milk drinks with stock burrs; filter capable |
Espresso or filter with broad RPM and burr flexibility |
Highly versatile for espresso and filter |
Espresso and filter experimentation on a 64mm platform |
| Best reason to choose it |
Fast, powerful 83mm grinding without paying for RPM control |
Maximum 83mm control and premium motor design |
Best balance of flexibility, burr availability and price |
Variable-speed 64mm performance in a smaller platform |
| Main tradeoff |
No RPM adjustment |
Higher cost and larger footprint |
Less motor power and smaller burrs than the DF83 models |
Higher cost than the fixed-speed DF64 |
Which grinder should you choose?
Choose the DF83 Gen 2 if you want the most economical route to a fast, powerful 83mm grinder and prefer a consistent fixed-speed workflow.
Choose the DF83V V3 if you want an 83mm platform with adjustable RPM, a stronger brushless motor and additional control over feed and grinding speed.
Choose the DF64 Gen 2.7 if value, smaller size and access to the broad 64mm aftermarket burr ecosystem matter more than maximum motor power or 83mm throughput.
Choose the DF64V Gen 3 if you want variable speed and a brushless motor but prefer a smaller 64mm platform.
Important: An 83mm burr is not automatically better for every coffee. Burr geometry and recipe have a major influence on body, clarity and flavor separation. Choose the platform that matches the coffees you brew and the workflow you want.
Frequently Asked Questions
Is the DF83 Gen 2 good for espresso?
Yes. Espresso is its strongest use case. The large burrs, 550W motor and stepless collar support fast grinding and precise dialing.
Can it also grind for pour-over and French press?
Yes. Its adjustment range covers filter and immersion methods. Filter-focused burrs can further increase clarity and reduce fines.
What changed from the original DF83?
Gen 2 adds the redesigned exterior, polished adjustment collar, plasma generator, integrated anti-popcorn collar and four-post/four-spring burr-carrier support.
Does the DF83 Gen 2 have variable speed?
No. It runs at approximately 1,400 RPM. Choose the linked DF83V if adjustable RPM is important.
How much coffee does it retain?
It is designed for very low retention, but exact input-to-output results vary with beans, grind size, seasoning, static, cleanliness and bellows technique.
Does it require RDT?
The plasma generator reduces static, so many users can grind without RDT. A minimal mist may still help in unusually dry conditions.
Is the DF83 Gen 2 noisy?
Its powerful motor and large burrs grind quickly, limiting total grinding time. Perceived noise varies with beans, grind setting and the surface beneath the grinder.
Can it grind directly into a portafilter?
The fork can accommodate many 58mm portafilters, although the included dosing cup is usually the cleanest and most repeatable workflow.
Should I start the grinder before adding beans?
Yes. A running start supports smooth feeding and reduces motor load, especially at espresso settings.
Should I adjust finer while the grinder is running?
Yes. When moving finer, run the motor so trapped coffee does not bind the adjustment mechanism.
Can SSP 83mm burrs be installed?
Yes, compatible SSP 83mm burrs with the correct mounting pattern can be installed. Confirm fit before ordering.
Does Espresso Outlet install or align SSP burrs?
No. SSP upgrades ship uninstalled and unaligned, and the original stock burrs remain included.
Do the burrs need seasoning?
The grinder can be used immediately, but grind behavior may change slightly during the first several pounds of coffee.
How do I clean the DF83 Gen 2?
Unplug it, brush the chute and dosing area regularly, and follow the manual for deeper burr-chamber cleaning. Keep liquids away from the motor and chamber.
Will cleaning change my grind setting?
Mark or record the collar position before disassembly. This makes returning near the previous dial-in point easier after reassembly.
What comes in the box?
The grinder includes installed Red Titanium burrs, bellows, wood lid, anti-popcorn collar, dosing cup, cup tilter, cleaning brush and manual.
Is this the 120V US version?
Yes. This Espresso Outlet listing is the 120V / 60Hz US model.
What warranty is included?
A one-year Espresso Outlet warranty is included for the original purchaser, subject to the complete warranty terms.
Where can I get setup and maintenance help?
Visit the DF83 support page, the Turin grinder getting-started hub, or submit an Espresso Outlet support ticket.
DF83 Gen 2 Videos
These videos cover reviews, dialing in and maintenance. Each video loads only after you click its thumbnail.
Turin DF83 Gen 2 Review
An independent look at the DF83 Gen 2 as an affordable large-burr espresso grinder.
DF83 Gen 2 vs DF64 Gen 2 Review
Compare the two fixed-speed Turin grinders, including workflow, burr size and value.
DF83 Gen 2 Improvements Explained
See how the Gen 2 changes affect alignment, static control and day-to-day use.
How to Dial In Espresso with the DF83
A step-by-step guide to using the stepless collar to refine an espresso recipe.
How to Clean the DF83 Exit Chute
Three practical steps for keeping the chute clear and maintaining a cleaner workflow.
