Victoria Arduino Black Eagle VA388 Volumetric T3
- Free Shipping for Orders Over $100 in USA 48 States - No International Shipping
Commercial project planning: Confirm the final manufacturer cut sheet, voltage, phase, amperage, plug or hardwire method, treated-water supply, drain, counter support, freight access and local code requirements before rough-in. Package, installation and service coverage vary by location; call (815) 954-4086 for a written quote.
Independent Temperature Control for a Specialty Coffee Bar
The Victoria Arduino Black Eagle VA388 Volumetric T3 is a multi-boiler commercial espresso machine for specialty cafés and high-end hospitality programs that need repeatable dosing, strong steam capacity and precise thermal management. This listing covers the volumetric two- and three-group configurations. Gravimetric versions use built-in scales and should be quoted separately.
T3 technology uses separate PID control points for steam, brew water and the group to manage temperature in real time. A central TFT interface and group displays place recipe and operating information in front of the barista. Volumetric dosing automates water delivery, while manual mode remains available for dialing in, rinsing and custom shots.
What the VA388 Adds to the Workflow
- T3 thermal control: independent regulation supports consistency and multiple coffee recipes.
- Volumetric portioning: repeat programmed doses without watching every shot.
- Group displays: show extraction time and operating information at the point of use.
- Cool-touch steam wands: help reduce burns and baked-on milk.
- Push-pull steam levers: ergonomic for repeated milk service.
- Insulated boilers: designed to limit heat loss.
- Two- and three-group options: scale the bar for peak concurrency.
Volumetric vs. Gravimetric
A volumetric machine stops a shot after a programmed flow volume. A gravimetric machine measures beverage weight in the cup. Gravimetric control can compensate more directly for some changes in flow, but it adds cost and complexity. This product's current variants are volumetric; do not assume the photos of a gravimetric unit mean scales are included.
Official Manufacturer Specifications
| 2 Group | 3 Group | |
|---|---|---|
| Width | 822 mm / 32.4 in | 1072 mm / 42.2 in |
| Depth | 480 mm / 18.9 in body dimension | Confirm final cut sheet |
| Height | 690 mm / 27.2 in | 690 mm / 27.2 in |
| Net weight | 85 kg / 187 lb | 110 kg / 243 lb |
| Steam boiler | 11 L | 17 L |
| Coffee boiler | 0.6 L per group | 0.6 L per group |
| Published power | 7300 W | 9100 W |
| Water / drain | Direct / required | Direct / required |
Published dimensions can distinguish the machine body from total installation clearance. Use the North American pre-installation sheet for counter cutouts, hose space, voltage, phase and connector requirements.
Bar Planning and Water
The VA388's electrical and plumbing demand is substantial. Coordinate the espresso technician, electrician, plumber and millworker before the counter is built. Select water treatment from measured hardness, alkalinity, chloride and other manufacturer limits, then size it for the shop's daily volume. Review our water-hardness guide.
Maintenance
Backflush each group, clean screens and baskets, purge and wipe steam wands, wash the drain tray and follow the automated cleaning prompts. Log water-filter changes and preventive maintenance. Multi-boiler precision depends on keeping probes, valves and hydraulic components clean and calibrated.
Frequently Asked Questions
Are gravimetric scales included?
No. The listed variants are volumetric. Request a specific Gravitech quotation if brew-by-weight is required.
What does T3 control?
Victoria Arduino describes three control areas: steam, brew water and group temperature. Separate PIDs allow more precise thermal management than a traditional single-boiler platform.
Can the two groups run different temperatures?
The T3 architecture supports group-level temperature control. Confirm the available recipe settings for the exact software and configuration quoted.
Which size is best?
Two groups suit most specialty bars; three groups add concurrency and redundancy where sustained peak demand justifies the width and power.
What grinder should be paired with it?
Use commercial grinders with output and duty cycle matched to peak orders. Many shops use separate primary and decaf grinders; compare our commercial grinder selection.
Use collapsible tabs for more detailed information that will help customers make a purchasing decision.
Ex: Shipping and return policies, size guides, and other common questions.
