Rocket Boxer (Shot Timer) - 1 Group Tall Cup
- Free Shipping for Orders Over $100 in USA 48 States - No International Shipping
Commercial installation required · U.S. shipping only. This is the one-group Tall Cup model with shot timer, not the Boxer Tank. Confirm the supplied electrical configuration, treated-water connection, drain, delivery access and installation requirements before ordering. A one-year Espresso Outlet warranty applies; commercial labor, travel and installation coverage depend on the written purchase terms.
Rocket Boxer 1 Group Tall Cup: Commercial Espresso for a Single Brewing Station
The Rocket Boxer 1 Group combines an 8.3-liter copper heat-exchange boiler with automatic portion control in a body approximately 18.9 inches wide. It is a practical candidate for a restaurant espresso station, bakery, compact café or properly equipped mobile bar that can work around one brew group. The Tall Cup configuration adds approximately 120mm of clearance, while the included shot timer helps the barista monitor extraction.
The reason to choose this Boxer is not simply that it is small. It preserves a commercial water connection, substantial steam reserve and programmed dosing without adding a second brewing position. The tradeoff is concurrency: a second portafilter cannot extract while the first occupies the group. Plan around the busiest sequence of orders rather than treating the boiler size as a guaranteed drinks-per-hour rating.
Boiler, Dosing and Temperature Management
The thermosiphon heat-exchanger system heats the brew group while the main boiler supplies steam and hot water. A pressurestat regulates the boiler. This is not a dual-boiler platform with an independently adjustable coffee-boiler PID, and the steam-pressure gauge does not directly report temperature at the coffee puck.
Automatic portion control stops programmed water delivery, allowing one barista to move between brewing, milk and assembly. The shot timer adds duration feedback; neither feature weighs the beverage. Establish a recipe by coffee dose, beverage weight, time and taste, then verify it as beans and grinder settings change.
Boxer 1 Group Tall Cup Specifications
| Configuration | 1 group, Tall Cup, shot timer included on this listing |
|---|---|
| Boiler and heating system | 8.3 L copper; thermosiphon heat exchanger |
| Portion control | Automatic volumetric dosing with manual delivery |
| Thermal control | Pressurestat; no separate brew boiler |
| Rated power | 2.3 kW |
| Electrical planning | This listing has been specified as 115V with a 30A commercial circuit. Confirm the delivered nameplate, required circuit and connector before installation. Rocket also offers other regional configurations. |
| Dimensions | 480 W × 490 D × 471 H mm; approximately 18.9 × 19.3 × 18.5 in |
| Cup clearance | Approximately 120mm on the Tall Cup configuration |
| Body and steam wand | AISI 304 stainless-steel cabinet; stainless cool-touch steam wand |
| Water and wastewater | Direct water supply and drain; treatment selected from the water test |
Do not interpret “115V” as permission to use an ordinary 15A outlet. A qualified installer should confirm the exact unit and circuit. A plug adapter cannot increase circuit capacity.
Is One Group Enough for Your Business?
Count espresso extractions in the busiest fifteen minutes and include large milk drinks, hot-water demand, remakes and cleaning. One double-spout extraction can be split into two small cups, but two drinks requiring a full double shot normally need separate extractions. A fast grinder and an organized milk station help, but they do not add another brew group.
Compare the Boxer 2 Group Tall Cup when overlapping orders regularly wait for the group. It has a 13.2-liter boiler and a wider 630mm body. Consider the Rocket Doppia when separated coffee and steam boilers are important, or the Rocket R9 when each group needs its own brew-temperature setting.
Installation, Grinder and Service Planning
Prepare the dedicated electrical supply, treated cold-water line, accessible shutoff and required drain before delivery. Leave clearance for steam-wand movement, cup storage, hoses and technician access. A trailer additionally needs an engineered water and wastewater arrangement, suitable power and transport restraints; the machine is not a self-contained cart appliance.
Match the Boxer to a commercial espresso grinder with a suitable dosing workflow and portafilter support. Plan a decaf strategy, water treatment, scale, tamper and milk-handling equipment as part of the same budget. Ask Dylan about commercial equipment or call 815-954-4086 for project planning; use the support form for an existing order or service issue.
Rocket Boxer 1 Group Tall Cup FAQs
Capacity and model selection
Is this the same machine as the Rocket Boxer Tank?
No. This is the direct-plumb Boxer with an 8.3-liter boiler. Boxer Tank is a separate manufacturer model. Its reservoir and power specifications should not be applied to this listing simply because both machines use the Boxer name.
Can the Boxer 1 Group run a small café?
It can when the peak queue, milk demand and staffing fit one brewing position. A quiet restaurant coffee program is different from a short, intense breakfast rush. Review the actual menu and service window before assigning a daily-cup capacity.
How many drinks per hour can it make?
There is no verified finished-drink guarantee stated for this listing. Grinding, preparing pucks, steaming, cleaning and handoff all consume time. Use a realistic peak-service assessment instead of calculating output from shot duration alone or borrowing a number from another one-group machine.
Can it make two espressos at once?
A suitable double-spout portafilter can divide one extraction between two cups. It does not create two independent brew positions. Different coffees, recipes or two full-double-shot drinks generally require separate brewing cycles.
When should I choose the two-group Boxer instead?
Choose two groups when the brew position regularly delays orders or two operators need to extract independently. Check the wider footprint and different electrical requirements as part of that decision. Two groups alone do not double the speed of grinding, steaming or drink assembly.
Is it suitable for a coffee trailer?
Potentially, with an approved power, water and drainage installation and adequate support for the machine. Include every simultaneous electrical load and the event rush in planning. Do not assume a reservoir or ordinary household outlet is available on this configuration.
Controls and cups
Does the one-group Tall Cup include a shot timer?
Yes. The timer is included on this specific shot-timer listing. Rocket describes timers as optional across the broader Boxer family, so that should not be generalized to every Boxer product or an older used machine.
Does the timer stop the shot?
The timer reports duration. The volumetric system stops programmed water delivery, and manual delivery is also available. Neither measures beverage mass; check the coffee in the cup with a scale when establishing or verifying the recipe.
Can it brew and steam simultaneously?
Yes, within the operating capacity of its heat-exchange and steam system. Consecutive large pitchers and hot-water draws affect recovery. Simultaneous operation is a useful workflow feature, not a promise of unlimited back-to-back milk production.
Does it have PID or an independent coffee boiler?
No. This Boxer uses pressurestat-controlled heat-exchanger architecture. For separate brew and steam regulation, compare Doppia; for a separate PID-controlled brew boiler at each group, compare R9.
Will a takeaway cup and espresso scale fit?
The Tall Cup clearance is approximately 120mm. Measure the particular cup, scale and portafilter-spout combination rather than choosing by a cup’s fluid-ounce label. Brewing into a smaller vessel may be necessary for taller takeaway cups.
Are cool-touch steam wands completely cold?
No. Cool-touch construction reduces heat exposure but does not make every part safe to grasp during operation. Steam and the tip remain hot. Staff still need safe handling and prompt wiping after milk use.
Utilities and ownership
Can I plug the 115V Boxer into a standard 15A outlet?
Do not do so based on voltage alone. This listing specifies a commercial circuit and requires confirmation of the actual nameplate and plug before connection. Have an electrician verify the complete installation; do not use an adapter to bypass circuit requirements.
Does the machine need both a water line and a drain?
Yes. Plan both separately, with accessible isolation and the required wastewater routing. A portable-water system must satisfy the machine’s pressure and flow requirements and local installation rules; placing an inlet hose into a bottle is not a complete supply system.
What water filter should I buy?
Test the incoming water and choose treatment against Rocket’s requirements. Taste filtration alone may not control scale or corrosion. Check treated output and cartridge capacity, especially when moving a trailer between water sources.
How does automatic backflushing work?
The U.S. Boxer Timer overview describes an automatic cleaning cycle. Staff must still fit the appropriate blind basket, use approved cleaner when required and complete the prescribed rinses. The feature does not clean milk tools, empty the tray or descale the boiler automatically.
Are installation and a grinder included?
Not unless the written package includes them. Confirm delivery, placement, utility work, commissioning, grinder setup and training separately. A machine price or shipping offer should not be interpreted as a complete installed coffee station.
What commercial warranty applies?
A one-year Espresso Outlet warranty applies, subject to the written commercial terms. Parts, labor, travel and installation are different coverage items. Use the support-ticket process before commissioning work expected to be covered, and obtain return authorization before shipping equipment.
Boxer Manufacturer References
See Rocket’s Boxer specifications, the Boxer brochure (PDF), and the U.S. Boxer Timer 1 Group overview. Compare our one-group commercial espresso machines.
Shipping and delivery requirements vary by product, destination, and order type. Review the product-specific notes on this page and Espresso Outlet’s shipping, return, cancellation, and warranty policies before ordering.
Large or commercial equipment may require freight delivery, bench testing, electrical work, plumbing, or professional installation. Submit a support ticket before ordering if you need help confirming requirements.
